Skip to main content

GitHub information


GitHub Repositories to Clone  



You can download or clone project code repository from the following URL


https://github.com/vaibhavkambli/



Thanks & Regards,
Vaibhav

Comments

  1. James Gibson8 March 2026 at 12:18

    Nice blog. Very informative blog. Complete formation. Keep sharing!!

    Do you want to Buy Metal Mesh Touch Sensor

    ReplyDelete

Post a Comment

Popular posts from this blog

Contiki Cooja Simulation

Cooja Simulator Contiki is an open source operating system for sensor networks and other networked embedded devices.  Contiki supports features like uIP stack (IPv6, RPL, 6LoWPAN), HTTP/CoAP, power profiling and others. It also contains a Cooja network simulator specifically designed for Wireless Sensor Networks. You can set up Contiki with VMware or Virtual-box . Instant Contiki   Virtual-Box   VMware   For VMware:-  Install VMware and extract Instant Contiki and start. For VirtualBox:- use this tutorial for virtual box setup   Instant Contiki VirtualBox Tutorial Cooja Relevant Directories in Contiki Contiki/tools/Cooja Type following Command to Run Cooja ant run It will open a Cooja blue window Create New Cooja Simulation  Select Option File-> New  Simulation Radio Mediums present in Cooja Unit Disk Graph Radio Medium UDGM ...
1 comment
Read more

Touch Sensor Module along with Small DC Motor Project for Arduino

Touch Sensor with Arduino With Following tutorial, you will be able to use Arduino digital input and output pins. To replicate exact results of this tutorial you will be required following 1. Arduino Uno 2. Capacitive Touch sensor  Buy Now 3.  Small 3V DC Toy Motor For Arduino Buy Now Procedure:  Connect Arduino Uno to PC for power and programming Connect Touch sensor's VCC pin to Arduino 3.3V output pin. Connect Touch Sensor's GND pin to any of Arduino ground pin. Connect Touch Sensor's SIG input to any digital input of Arduino pin (1-13) I am connecting to digital pin 3  Connect DC motor one leg to Digital Pin 13 and another leg to ground. Program Arduino with the following sketch. #define TOUCH 3 //the touch sensor is connected to D3 int DCMOTOR = 13; // pin for the DC motor.    void setup()  { pinMode(DCMOTOR, OUTPUT); pinMode(TOUCH, INPUT); }    void ...
2 comments
Read more